PSC Cylinder Assist™ Steering Kit for RHD Australian 2012-18 Jeep Wrangler JK 3.6L w/ OE Front Axle 6.75" Lock-to-Lock with 1-3/8" Tie Rod Clamp

This kit has been put together and suits all 2012-2018 Jeep Wranglers (both V6 and CRD Engines) Suited to handle tires up to 37" tires and moderate to heavy offroad use. Some small modifications are needed for the factory high pressure line from pump to steering box. A small amount of welding is required to mount the assist ram. Everything else is bolt on. Estimated install time of 4-6 hours depending on experiance and skill level.

KIT INCLUDES

SG684R-RH: New Factory Cylinder Assist™ Steering Gear for 2007-18 Jeep Wrangler JK/JKU ( Right Hand Drive)

CAK061R-8: Single Ended Steering Assist Cylinder, 1.75" Bore X 8" Stroke

SP33352SJP: Jeep Spacific power steering pump with 5.5" pulley installed

MB11K Upgraded pump mount

SR146-6-10: 8.25" Tall Reservoir with pump hose feed

SR-VT: Remote Reservoir Anti Splash Valve

CK215-8: Heat Sink Fluid Cooler Kit

HA-L138: Fluid Reservoir to Power Steering Pump Feed Hose

MR20K:Remote Reservoir Mounting Kit

TRCL1.25: Tie Rod Clam (This can be exchanged for a size that will suit your tie rod)

HK205: Assist Cylinder Installation Hose Kits

4x 1L Maxima Power Steering Fluid

PLEASE NOTE:Picture shows High pressure line and drive belt that are only avalable for LHD models and is not included in this package.

Pitman arm shown in picture is an optional extra at $420 The Factory arm can be used.

These kits are normally kept in stock but are ordered in batchs, If we are sold out they will already be on order and on the way longest lead time is under 3 weeks.

(PSC-JK-AU-KIT)

SKU PSC-JK-AU-KIT
Brand PSC Motorsports
Shipping Weight 18.0000kg
Shipping Width 0.500m
Shipping Height 0.500m
Shipping Length 0.500m
Shipping Cubic 0.125000000m3