Fox 2.5" Six Tube Bypass Shock Viton O-Ring Rebuild Kits For 7/8" Shaft With Piggyback Reservoir

Don't forget to purchase a shaft bullet (listed below). There's nothing worse than having to rebuild your shocks twice, simply because you tore a seal when you were reassembling your shock. This cheap tool saves a lot of headache and time spent in rebuilding your Fox shock absorber.

Shock Body Seals:

• 1 Wiper seal for the bearing cap
• 1 Wiper seal for the shaft bearing / shaft guide
• 1 Internal o-ring for the shaft bearing / shaft guide
• 1 External o-ring for the shaft bearing / shaft guide
• 1 Soft wear band for the shock's piston

2.5" Reservoir Seals:

• 1 Soft wear band for the reservoir's piston
• 1 Thick o-ring for the reservoir's piston
• 2 O-rings for both end caps of the reservoir
• 1 O-ring for the reservoir's end cap to the shock body tube
• 1 O-ring for the new aluminium type Schrader valve
• 1 O-ring for the old 7/16" type Schrader valves

Bypass Seals:

• 12 O-rings for the bypass adjusters (enough to do 6 adjusters)