PSC Full Hydraulic Single Ended Steering Cylinder

  • PSC high quality single ended steering cylinder
  • 2.25" or 2.5" Bore Size can be used as a stand alone single ended ram, If used as a steering assist it will slow down the steering reaction without upgrading the factory pump on most vehicles. This size is suggested for vehicles running 40" tyres and are regularly offroad.
  • 1.5" or 1.75" bire size are best suited to your daily drivers or weekend wariors looking for a little lighter steering up to 37" tyres. These rams can often run using a factory steering pump but an upgraded pump is always suggested.
  • Hardware & mounting kit come with heims required for selected ram, hardware to suit heims and basic mounting tabs.
  • Hardware kit is supplied with part numbers ending with K
  • 6" stroke is best suited to Toytoa Hilux, 60, 40 series and Suzuki axels
  • 8" stroke is for Patrol, 80 series, Dana and truck axels
Part Number Bore Size Stroke length Shaft size Hardware Kit
         
PSC-SC2200 1.5" 8.00" .625" No
PSC-SC2200K 1.5" 8.00" .625" Yes
PSC-SC2201 1.75" 8.00" .750" No
PSC-SC2201K 1.75" 8.00" .750" Yes
PSC-SC2204 2.25" 8.00" 1.125" No
PSC-SC2204K 2.25" 8.00" 1.125" Yes
PSC-SC2205 2.5" 8.00" 1.125" No
PSC-SC2205K 2.5" 8.00" 1.125" Yes
PSC-SC2206 1.5" 6.00" .625" No
PSC-SC2206K 1.5" 6.00" .625" Yes
PSC-SC2207 1.75" 6.00" .750" No
PSC-SC2207K 1.75" 6.00" .750" Yes

(PSC-8SC20Ram)

SKU PSC-8SC20Ram
Brand PSC
Shipping Weight 10.0000kg
Shipping Width 0.300m
Shipping Height 0.300m
Shipping Length 1.000m