Now that our sway bars have been in the marketplace for a number of years and have more than proven their quality we have found the need to allow our customers the freedom to design their own arms. This DIY kit still utilizes our Australian made torsion bars, Australian machined bushes, Australian machined splined slugs and all hardware is sorsed through local suppliers. 

This kit is to allow you to utilize our battle tested torsion bars and rod ends but give you the freedom to design around your suspension requirements. After the popularity of our kits grow we have found the need to offer our product that can be modified to suit some of the more difficult installations. We do however advise that this kit should only be utilised by the more experienced fabricator as it is not easy to perfect your arm design on the first attempt. 

 

This kit comes complete with the following.

2x DFI splined weldable slugs

1x DFI torsion bar 

4x DFI heim joints with jam nuts, spacers and bungs 

1x length of 1.75" x .102 CDS tube to mount the torsion bar

1x 800mm long 1.25" x .120 chromoly tube to make custom length links 

2x HDPE bush's

4x diff mounting tabs

1x Fasteners kit that includes everything needed

Our torsion bars are offered in a light medium and a HD torsion bar strength. 

The standard light will be slightly stiffer than the common product on the market. Our Medium will be about 25% stiffer, the Heavy is 80% stiffer. Custom HD is around 100% stiffer.

 

 

Ones again thank you all for the support if you have any questions please do not hesitate to ask any questions.

 

(DFI-swaybar-DIY32)

SKU DFI-swaybar-DIY32
Brand DesignFab Industries
Shipping Weight 17.0000kg
Shipping Width 0.300m
Shipping Height 0.300m
Shipping Length 1.100m
Shipping Cubic 0.099000000m3