RockJock's Antirock sway bar kits are available in a universal fit configurationÂ for those building their own custom rigs and rock buggies. This universal kit features a 50" torsion bar length and 21" long fabricated steel arms. Vertical links use a 14" long 1/2" x .20 RH/LH threaded rod that can be cut down to your desired length, and the necessary 1/2" x 20 thread heim joint rod ends, jam nuts, and tabs to weld to your axle tube are supplied. Also supplied is the universal weld-in 1.75" x .095 wall DOM tube that is cut to the proper length to work with the torsion bar length, and the delrin bushings to support the bar in the tube. The 50" bar is a 1" diameter. These kits require fabricating for installation -- these are NOT bolt-on kits.
These kits are not kept in stock and are ordered as required. Time between order and delivery is usually 4 weeks or less.
This is the common kit used on the rear end of Nissan Patrols